The Audiophile Edition cable R95 is especially developed for application in the sphere of digital data transmission and is perfectly suited for the S/PDIF (Sony/Philips Digital Interface Format) interface standard, for DVD digital audio to a Dolby Digital/DTS processor or for outboard DACs (Digital to Analog Converter).  R95 cable uses triple shielded coaxial construction with silver-plated oxygen-free copper conductors. The pure silver layer of the central multi-strand conductor and inner braided conductor enhances the high frequency response properties of the cable, which is very important for digital audio signal transmission. The high technology design of R95 and PE foam dielectric produce an extremely low attenuation (0.006dB/Meter at 1MHz!!!) and true invariant 75 Ohms characteristic impedance. The Mylar foil shield and high density tinned copper braid shield provide very efficient noise protection.  The polyethylene foam dielectric guarantees both stable impedance of the cable [+/- 2%] and accurate reproduction of the full spectrum of digital sound with minimal level of structural return loss. The cable is terminated in nickel-plated squeeze locking plugs, which provide a firm vibration resistant connection and offer a unique internal wedging system (to lock the connector in place). The pure gold-plated center-split tip and eight-cut ground sleeve enable the connector to provide maximum contact pressure, ensuring a stable and reliable connection practically immune to the most severe vibrations.